1
/
of
1
Twenty Two Designs
Steel Base with Bushings
Steel Base with Bushings
Regular price
$32.00
Regular price
Sale price
$32.00
Unit price
/
per
Couldn't load pickup availability
Steel base with bushings installed for Outlaw X and Axl.
If you are replacing the steel base with bushings, the pivot screws are installed with epoxy, so you will need to apply direct heat to the pivot screws for about 15 seconds on each side in order to remove them. You also need to use a slow cure 2 part epoxy when reinstalling the pivot screws. If the pivot screws become stripped. they will need to be unmounted and sent in for repair.
We recommend sending your bindings in for this kind of repair. Reach out to info@twentytwodesigns.com to receive an RA number before sending them in to us.
Part # 2 in Outlaw X Anatomy and part # 21 in Axl Anatomy
Share
