Lynx Telemark Binding

• Built for the Backcountry: ideal for setups spending 80%+ of their time in the backcountry.
• Easy step-in & out with a one-touch ski/walk mode that is pole activated for smooth transitions.
• Tech-toe with 80+ degrees of resistance free touring for effortless climbs—no lifted binding weight.
• Composite flex plates deliver instant engagement, transferring power directly to the ski, providing lateral stability & precision control.
• Adjustable preload & flex with 3 slic pin positions to dial in your perfect feel for all conditions.
• Lightweight springs with plenty of travel for smooth engagement all the way through the turn.
• Soft & Stiff main plates offer plenty of options for all conditions & preferences.
• Built to last with machined aluminum & durable plastics; made right here in Teton Valley.
• Ski Crampons available here.

Note: Lynx bindings purchased before the 24–25 season & paired with the new SCARPA TX Pro 2.0 may need updated main plates. More info here.

• Weight per binding including climber: Large: 1.15 lbs / 522g, Small: 1.08 lbs / 492g
• Preload easily adjustable via 3 slic pin positions
• Two spring-loaded climbing bails at approximately 8° & 13° (for a 27.0 boot)
• NTN boot compatible — available in Small & Large (See size guide)
• Ski/walk mode easily accessible using your poles
• Softer main plates come standard on 24–25 models & newer
• Secure 6-hole mounting pattern
• Our bindings are not DIN-certified releasable — ski at your own risk
• Tech Info Page

The easiest way to get a bombproof telemark binding mount is to have a qualified 22 Designs Dealer do it. They will have a 22D mounting jig and know the recommended mounting positions for your specific skis.  See our dealer map to locate a dealer near you. If you want to mount them yourself, we’ve got you covered — resources can be found below:

LYNX Anatomy

Instructional Poster

Mounting LYNX Binding With a Jig

Mounting LYNX Binding With a Template

Clear Plastic Mounting Template (recommended)

Printable Mounting Template
IMPORTANT

Be sure your printer's settings are set to print actual size, not 'Fit to page'. After printing and before drilling, measure the distance between the dots, which should be exactly 1.5 inches.

RoXbo Mounting Jig

RoXbo Jig Plates

• Free Shipping on orders $250 and over
• Returns for online purchases are valid 90 days after purchase. The product must be in its original packaging and never mounted or skied.

If you need to make a return for any reason, please visit our
Returns Policy Page