Replacing the HammerHead Cable Spreader
1. Remove the heel tube.

2. Unscrew the machine screw with a 1/8" hex wrench.

3. Pull the cable apart to release the orange inside spreader.

4. Insert the blade of a medium flat head screwdriver and rotate it to open up the old spreader.


5. Slide it over the coils.

6. Reverse the steps to install the new spreader, using channel-lock pliers to insert the inside spreader.

1. Remove the heel tube.

2. Unscrew the machine screw with a 1/8" hex wrench.

3. Pull the cable apart to release the orange inside spreader.

4. Insert the blade of a medium flat head screwdriver and rotate it to open up the old spreader.


5. Slide it over the coils.

6. Reverse the steps to install the new spreader, using channel-lock pliers to insert the inside spreader.
